7 Guidelines for Well-Kept Garden Tools

Admittedly, it’s not always enjoyable to have to spend half an hour after a tiring day of gardening to clean up tools. Yet it is well worth the effort. It’s much better for the plants in the garden.

Pruning tools must be cleaned up before using on each plant. That way you prevent the transfer of any bacteria and fungi from one to the other plant. That can be done by dipping the shears in soapy water and wipe them with a fabric. In addition, the blades need to likewise be sharp so that a great cut takes place. To keep the blades of pruning tools sharp enough in regular usage a sharpening is required per season. This can be done with a so-called multi-tool.


The easiest method is to do this task at the end of the gardening weather. You can then get the trimmer completely apart, clean and oil after grinding so that it is ready to use whenever you desire.

A so-called whetstone works easiest. Put this one for an hour in advance in a container with water so that it has actually taken in a great deal of water. For best results, it is very important that the “grinding angle” is as consistent as possible.

After grinding, you require good grease things. Whatever you do, the golden idea here is not too shabby. It is much better to have excessive grease than too little. It avoids rust and keeps the operation smooth and great. Rub out the excess fat with an old, dry cloth.

The best enemy of gardening is rust. Rusty tools, whether it be a spade or hoe, does not work when it is much heavier.

If your tools hang on the wall, much suffering can be prevented. Frequently, nevertheless, it ends up in the corner of the garage or shed with the metal parts on the floor. This ensures just that it will rust quicker.


If you hold simply under the outside tap of the large tool after each use and rinse it well, you can entirely avoid rust. Then dry it with a fabric and rub oil here. Then just as a sample file along the edges of the spade or hoe so that it is sharpened well.

Another typical annoyance that is different from the wooden deal with rake, hoe or shovel. Typically, dehydration of this is the main cause. Most people secure it with a screw or nail, however typically the connection will still be unsteady.

You can also rub the stem and set it extensively once a year in the linseed oil. Do it equally well in simmering and after that reach for any excess oil with a dry fabric. If you wish to help in the upkeep of the garden tools, you can certainly contact one of the garden centers to help you keep your garden clean. You can also arrange a workshop.

The seven rules in short

  • Take care of the wooden tools of your garden with linseed oil. This avoids loose.
  • When you use it, Hang tools always.
  • Cutting tools should be kept clean and in closed storage.
  • Wheel barrows and watering cans should be put outdoors on the head, so there remains no water in it.
  • Keep cutting tools sharp by grinding occasionally.
  • Tools should be kept clean and lubricate routinely. Nevertheless, if there is a rust spot? Sand it off with a piece of sandpaper.
  • Never leave a garden hose lying long in the sun.
Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *